iphepha_ibhena2

ULuxury Square Ceiling Moute Control Remote Imvula LED Ishawari ePhezulu

  • Umzekelo:DPG5030
  • Uphawu:I-COFE
  • Izinto:Yenziwe ngentsimbi eshayinayo
  • Ubungakanani:L700×W380mm
  • Phezulu-Ukutshiza-11

    Yongeza kwi-Basket

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    5030

    Inkcazo

    Intloko yeshawari enyuswe kwisilingi
    Ubungakanani 700x380mm
    Izinto eziphathekayo 2mm ubukhulu bentsimbi engama-304
    Ngolawulo olukude ukukhanya kwe-LED kunye ne-5 ye-stainless braided hoses
    Imisebenzi Isitshizi semvula, ikholamu yamanzi, inkungu, iingxangxasi eziphindwe kabini, i-LED
    DPG5030A

    Iinkcukacha

    5030_01 5030_02

    Izinto eziluncedo kwimveliso

    1. Le silingi yokunethezeka efakwe kwishawari yemvula yentloko icutshungulwa zizixhobo zethu eziphambili kunye neenkqubo ezingqongqo zomgangatho, kunye nofakelo lwenziwe lula.
    2. Imibala emininzi iyakhethwa kwaye imibala ekhethekileyo inokwenziwa ngokwezifiso nge-powder coating okanye iteknoloji yokugqoka i-PVD.
    3. Imisebenzi emihlanu yesitshizi semvula, inkungu, intsika yamanzi kunye neengxangxasi eziphindwe kabini zivelisa izibane ezimibalabala.
    4. Inkungu enezibane idala umhlaba oyintsomi.Ikholamu yamanzi kunye neengxangxasi zikwenza ube kwindalo kunye nemvula enkulu ekujikelezile kubonakala ngathi.
    5. Ulawulo olukude ukukhanya kwe-LED kuzisa ishawari efudumeleyo neyonwabisayo.

    Inkqubo yeMveliso

    Umzimba:
    Ukukhetha ipleyiti engundoqo ==> ukusika i-laser ==> ukuchaneka okuphezulu kwe-laser yokusika ==> ukugoba ==> ukugaya umphezulu ==> ukugaya umphezulu ocolekileyo ==> ukupeyinta / ukufakwa kwe-electroplating ==> indibano ==> uvavanyo lomlambo olutywiniweyo ==> phezulu kunye novavanyo lokusebenza lobushushu obuphantsi ==> uvavanyo lwemisebenzi ebanzi ==> ukucocwa kunye nokuhlolwa ==> ukuhlolwa ngokubanzi ==> ukupakishwa

    Amacandelo Angundoqo:
    Ukukhetha ubhedu ==> ukusika okucokisekileyo ==> ukuchaneka okuphezulu kweCNC ukusetyenzwa ==> ukupeyishwa kakuhle ==> ukupeyinta / i-electroplating ephezulu ==> ukuhlolwa ==> iindawo ezigqityiweyo zokugcina zilindile

    Ingqalelo

    1. Ngethuba lofakelo lokuqala, qaphela ukutywinwa kweendawo ezifanelekileyo zokudibanisa umzila wamanzi, kunye nokuchaneka kokufakwa kwemibhobho yamanzi ashushu kunye abandayo kunye neminye imisebenzi yamanzi.Funda umgaqo ngononophelo.
    2. Xa ulwakhiwo lweendlela zamanzi eludongeni lugqityiwe, kwaye emva kokucoca ugutyulo olukhoyo, uvavanyo lulonke lokutywinwa kweendlela zamanzi kunye neemvavanyo ezisebenzayo ezinxulumeneyo zenziwa ukuqinisekisa ukuba umgaqo wamanzi uvalwe kakuhle kwaye umsebenzi uchanekile.
    3. Xa usebenzisa le mveliso, umphezulu akufanele uchukunyiswe ngezinto ezitshabalalisayo kwaye kufuneka ugweme ukubetha izinto ezibukhali ukuze kugcinwe ukubonakala okupheleleyo.
    4. Nika ingqalelo ukucocwa kweendlela zamanzi, ukuze ungavimbeli umbhobho kunye neengono ze-silicone.
    5. Ukuba iingono ze-silicone zivaliwe okanye i-waterline igoso emva kokusetyenziswa ixesha elide, nceda usebenzise i-plastic sheet eqinile ukuze ucofe kwaye ukhuhle umphezulu kancinci ukucoca isikali esingaqhelekanga esiqhotyoshelwe kunye nokujikeleza umgodi.ukuba kukho ukuvaleka okungenakuthintelwa, ungasebenzisa iibrashi okanye iinaliti zokutsiba zeplastiki ezinobubanzi obungekho mkhulu kunomngxuma wokuphuma ukuze ucoce kwaye wenze ukuba ukuphuma kwamanzi kusebenze njengesiqhelo.

    Umthamo wefektri

    _LYK8928

    _LYK8549

    _LYK8714

    _LYK8436

    _LYK8988_

    _LYK8712

    _DSC1608

    _LYK8595

    _LYK8431

    Izatifikethi

    ACS 18-653h
    I-ACS 18-652-huidi
    ISO 9001:2015-2
    I-Microsoft Word - 2013-C232-1.doc
    I-WaterSense
    0008659-1
    0008449-1
    008448-1

  • Ngaphambili:
  • Okulandelayo:

  • Thenga ngoku